Microswitch Kits for A+ Control Box - B-87-024 - Range Guard (wet chemical) B-87-024
Microswitch Kits for A+ Control Box - B-87-024 - Range Guard (wet chemical)
B-87-024
The Single Microswitch Kit includes a single pole, double-throw microswitch. The Dual Kit includes two single pole, double throw (SPDT) microswitches.
Included in the kit:
- Microswitch
- Pigtail assembly
- Mounting bracket and hardware (screws, lockwashers and hex nuts)
- Microswitch mounting hardware (screws, lockwashers and hex nuts)
The wire leads are 24-inches (610 mm) in length. One Single SPDT or one Dual SPDT Microswitch Kit can be mounted in the A+ Control Box. These are used when it is necessary to open or close electrical circuits. Examples include, but are not limited to:
- Electric appliance shutdown
- Make up air shutdown
- Electric gas valve shutdown
- Shuntbreaker/relay
Electrical appliances usually have a higher amp rating than the microswitch. In this case, such appliances shall not be wired directly to the microswitch. A magnetic contactor or relay must be used.
For wiring the microswitches for the A+, refer to Figure 3.
-
For Use in Range Guard® Commercial Cooking Fire Suppression Systems
Badger is a registered trademark of Kidde-Fenwal, Inc. Range Guard is a registered trademark of Badger Fire Protection.
This literature is provided for informational purposes only. BADGER FIRE PROTECTION assumes no responsibility for the product’s suitability for a particular application. The product must be properly applied to work correctly.
Included in the kit:
- Microswitch
- Pigtail assembly
- Mounting bracket and hardware (screws, lockwashers and hex nuts)
- Microswitch mounting hardware (screws, lockwashers and hex nuts)
The wire leads are 24-inches (610 mm) in length. One Single SPDT or one Dual SPDT Microswitch Kit can be mounted in the A+ Control Box. These are used when it is necessary to open or close electrical circuits. Examples include, but are not limited to:
- Electric appliance shutdown
- Make up air shutdown
- Electric gas valve shutdown
- Shuntbreaker/relay
Electrical appliances usually have a higher amp rating than the microswitch. In this case, such appliances shall not be wired directly to the microswitch. A magnetic contactor or relay must be used.
For wiring the microswitches for the A+, refer to Figure 3.
-
For Use in Range Guard® Commercial Cooking Fire Suppression Systems
Badger is a registered trademark of Kidde-Fenwal, Inc. Range Guard is a registered trademark of Badger Fire Protection.
This literature is provided for informational purposes only. BADGER FIRE PROTECTION assumes no responsibility for the product’s suitability for a particular application. The product must be properly applied to work correctly.