Electric Gas Valve and Manual Reset Relay - B-87-023 - Industry & Range Guard (wet & dry chemical)
B-87-023

The Badger Electric Gas Valve (Figure 1) is used on systems protecting gas-fueled equipment (e.g., appliances). The Badger valve uses an electrically operated solenoid (120V, 60 Hz), which holds the valve in the open position. Upon system actuation or loss of electrical power, the valve closes, stopping the flow of gas to the equipment. All Electric Gas Valves must be installed horizontally with the solenoid up.

Figure 1. Electric Gas Valve

A Badger Manual Reset Relay, P/N 60-9101735-000, is required with all Badger Electric Gas Valves. The Manual Reset Relay (Figure 2) provides DPDT contacts rated for 10 amps at 120 Vac and prevents immediate reopening of the Electric Gas Valve. The Electric Gas Valve and Manual Reset Relay must be specifically listed for use with the Badger Range Guard or Industry Guard suppression system.

Figure 2. Manual Reset Relay, P/N 60-9101735-000

The Electric Gas Valve can be controlled via a Pressure Switch* installed in the discharge piping (Figure 3 and Table 1) or via a microswitch from the Universal Control Head or A+ Control Box* (Figure 4).

• For Use in Range Guard® Commercial Cooking Fire Suppression Systems and Industry Guard™ Industrial Fire Suppression Systems

• For Use with Badger Universal Control Head or A+ Control Box

• UL Listed and ULC Listed

• FM Approved for Industry Guard Systems

ORDERING INFORMATION

• 1/2-in. Electric Gas Valve 60-9197017-000

• 3/4-in. Electric Gas Valve 60-9197018-000

• 1-in. Electric Gas Valve 60-9197019-000

• 1-1/4 in. Electric Gas Valve 60-9197020-000

• 1-1/2-in. Electric Gas Valve 60-9197021-000

• 2-in. Electric Gas Valve 60-9197022-000

• 2-1/2-in. Electric Gas Valve 60-9197444-000

• 3-in. Electric Gas Valve 60-9197445-000

• Manual Reset Relay 60-9101735-000

• Microswitch, Quick Connect, Solid Leads (for UCH) 87-120039-001

• Microswitch, Quick Connect, Striped Leads (for UCH) 87-120039-501

• Microswitch, Quick Connect, SPDT (for A+) 60-9197227-000

• Microswitch, Quick Connect, Dual SPDT (for A+) 60-9197228-000

• Pressure Switch* 60-9197023-000

Badger and Kidde registered trademarks of Kidde-Fenwal, Inc. Range Guard is a registered trademark of Badger Fire Protection. AEGIS and ARIES are trademarks of Kidde-Fenwal, Inc. Industry Guard is a trademark of Badger Fire Protection.

This literature is provided for informational purposes only. BADGER FIRE PROTECTION assumes no responsibility for the product’s suitability for a particular application. The product must be properly applied to work correctly.