Mechanical Gas Valves - B-87-022 - Industry & Range Guard (wet & dry chemical)
B-87-022

A Mechanical Gas Valve (Figure 1) is required on systems used to protect gas-fueled equipment (e.g., appliances). Upon system actuation, tension on the control stem is released, closing the valve and stopping gas flow to the equipment.

All Mechanical Gas Valves include an optional cable block (see Figure 2) which can be used to prevent overextending the valve stem in the open position.

Note: Only Mechanical Gas Valves that are specifically UL listed and identified by part number in this data sheet may be used with the Badger® system.

• For Use in Range Guard® Commercial Cooking Fire Suppression Systems and Industry Guard™ Industrial Fire Suppression Systems

• For Use with Universal Control Head and A+ Control Box

• UL & ULC Listed

• FM Approved for Industry Guard Systems

ORDERING INFORMATION

Gas Valves:

• 3/4 in. (19 mm) 60-120071-001

• 1 in. (25.4 mm) 60-120072-001

• 1-1/4 in. (32 mm) 60-120073-001

• 1-1/2 in. (38 mm) 60-120074-001

• 2 in. (51 mm) 60-120075-001

• 2-1/2 in. (64 mm) 60-120076-001

• 3 in. (76 mm) 60-120077-001

Pulley:

• Double Tee Pulley 83-843792-000

Badger is a registered trademark of Kidde-Fenwal, Inc. Range Guard and Industry Guard are trademarks of Badger Fire Protection.

This literature is provided for informational purposes only. BADGER FIRE PROTECTION assumes no responsibility for the product’s suitability for a particular application. The product must be properly applied to work correctly.