Mechanical Remote Manual Release - B-87-016 - Industry & Range Guard (wet & dry chemical) B-87-016
Mechanical Remote Manual Release - B-87-016 - Industry & Range Guard (wet & dry chemical)
B-87-016
The Mechanical Remote Manual Release is provided as a means of manually actuating the Badger Range or Industry Guard Fire Suppression Systems from a remote location.
This release is installed on the UCH (Universal Control Head) using 1/16-inch Badger control cable, P/N WK-219649-000. The Badger suppression system is actuated by pulling out the safety pin and pulling hard on the handle.
Each Remote Manual Release is supplied with a separate nameplate which must be attached to the mounting surface one inch above or below the device.
Note: A second manual release can be installed on a single UCH line utilizing the Badger tee pulley, P/N 83-843792-000.
-
Range Guard® Commercial Cooking Fire Suppression Systems
-
Industry Guard™ Industrial Fire Suppression Systems
-
For Use With Badger® UCH Control System
-
UL & ULC Listed
-
FM Approved for Industry Guard Systems
Badger and Range Guard are registered trademarks of Kidde-Fenwal, Inc. Range Guard is a registered trademark of Badger Fire Protection. Industry Guard is a trademark of Badger Fire Protection.
This literature is provided for informational purposes only. BADGER FIRE PROTECTION assumes no responsibility for the product’s suitability for a particular application. The product must be properly applied to work correctly.
This release is installed on the UCH (Universal Control Head) using 1/16-inch Badger control cable, P/N WK-219649-000. The Badger suppression system is actuated by pulling out the safety pin and pulling hard on the handle.
Each Remote Manual Release is supplied with a separate nameplate which must be attached to the mounting surface one inch above or below the device.
Note: A second manual release can be installed on a single UCH line utilizing the Badger tee pulley, P/N 83-843792-000.
-
Range Guard® Commercial Cooking Fire Suppression Systems
-
Industry Guard™ Industrial Fire Suppression Systems
-
For Use With Badger® UCH Control System
-
UL & ULC Listed
-
FM Approved for Industry Guard Systems
Badger and Range Guard are registered trademarks of Kidde-Fenwal, Inc. Range Guard is a registered trademark of Badger Fire Protection. Industry Guard is a trademark of Badger Fire Protection.
This literature is provided for informational purposes only. BADGER FIRE PROTECTION assumes no responsibility for the product’s suitability for a particular application. The product must be properly applied to work correctly.